| Pipe sizes: | 4" and 6" standard; 2" and 3" options available |
| Hose sizes: | 2- 40' hydraulic hoses (from puller to power unit) |
| Weight: | 210 lbs. (3 separate components—no component weighs more than 70 lbs.) |
| Power Supply: | 13 H.P. Honda with electric start , supplying 3,000 PSI at 5 GPM |
| Power Supply Dimensions: | 26.5" L X 20" W X 27.5" H mounted on 10" pneumatic tires |
| 5-gallon hydraulic reservoir |
| Hydraulic tank sight gauge |
| Low-engine-oil shut down |
| Hour meter |
| HTMA hydraulic couplings |
| Flush mounted operating pressure gauge |
| Hydraulic puller unit dimensions: 22" L X 22" W X 32.5" H |
| Swedged ¾" x 110' pulling rope rated at 70,600 lbs. of pulling strength (150' and 200' pulling rope is available) |
| Operates at 3 – 10 GPM hydraulic flow |
| 200' duct rod w/carrier (for inserting pulling rope) |
| 4" and 6" fusion machine with pipe locking device and knurled locking handles |
| Fusion Machine dimensions: 12"L X 13"W X 19"H |
| Facing tool features a reversible drive drill with built in guide assembly capable of facing 4" and 6" pipe without changing cutting dies |
| Facing Tool weighs 20 lbs. |
| HDPE heating iron with safety storage bag assembly (adjustable temperature with temperature gauge) operates on 110 Volt service |
